Call Us :


0086-21-33901608

wet sanding after the second base coat

Wet sanding after the second base coat. - YouTube

24/09/2013  95 Chevy project. Wet sanding after the base coat is complete ....

Author: Ken Finnell

Wet Sand The Base Coat on the Hood - YouTube

6/05/2012  Wet sand the base on the hood to get any trash out with 1500 and also wet sand the bed side with ... Wet sanding after the second base coat. - Duration: 4 ...

Author: HoneyBadger OBS

How to Do a Good Base Coat Clear Coat Paint Job: 8

5/05/2006  How to Do a Good Base Coat Clear Coat Paint Job. Base coat/Clear coat ... How do I get a nice polish after wet sanding ... Why is my second coat of Clear ...

92%(371)

How to Wet Sand a Clear Coat - wikiHow

14/05/2010  How to Wet Sand a Clear Coat. ... wet sanding a clear coat is a pretty ... This sounds as if you may have burnt straight through the base coat and the grey ...

91%(160)

sanding basecoat? - Hot Rod Forum : Hotrodders

7/10/2008  Those you can color sand and recoat or clear after sanding. ... Sanding basecoat. I have sanded out base coat using 600 grit wet sand paper, ...

Do You Have to Scuff the Base Coat Before Painting the ...

Do You Have to Scuff the Base Coat Before Painting the Clear Coat. Base coat and clear coat is a painting system used on cars after ... Wet-sand the base coat before ...

Wet Sanding - When, Where, and How to Do it! - Dr.

But it's effective abilities makes wet sanding a vital ... how to wet sand, after they ... the paint and clear coat to ensure it will support a wet sanding ...

Can a Metallic Base Coat be sanded? The H.A.M.B.

3/07/2009  Can a Metallic Base Coat be ... just re shoot the color after you sand it, ... At this point I am going to say that you should wet sand it, most base is only good for ...

color sanding basecoat • How to Paint Your Own Car,

22/07/2005  color sanding basecoat. ... I usually wait over an hour after my last coat of base to make sure it flashes, ... wait another hour and apply the second and third coats ...

Wetsanding Basecoat??? - Hot Rod Forum : Hotrodders ...

8/09/2005  What brand of base coat? Some have strict rules not to sand. ... i always let my b/c dry and them wet sand the ... to this so I always dust another coat after sanding ...

Learn How to Wet Sand Your Car's Primer or Paint

Learn to wet sand your car's primer or paint to get the ultimate shine with this tutorial. ... if you are sanding a coat of rough ... After some time with the 400 ...

Sanding Base Coat Paint HondaSwap

12/09/2010  2. when wet sanding a base coat, ... I think this weekend after I sand the hood ... I'm not going to settle for a second rate job since this is the last time I ...

talking car paint: how to wet sand and buff your car

21/07/2005  how to wet sand and buff your car ... And yes you can wet sand and put a new coat of base and then apply clear. ... After the wet sanding is complete, ...

Sanding after Base Coat? - Bike Forums

3/08/2008  Classic Vintage - Sanding after Base Coat? - Hi, I am using Rust-Oleum paints (including primer, base color, and clear coat). For the base coat

Wet sand before or after clear coat? Mustang Forums

5/04/2005  Just what to know if you wet sand the base coat then spray the clear and wet sand the clear or do you prime-base ... Wet sand before or after clear coat

Sanding Scratches showing through base coat

30/03/2017  Waited 36 hours and then guide coat and wet sand with ... Sanding Scratches showing through base coat. ... I will block the guide coat and shoot 1 or 2 more after ...

TheSamba :: Body/Paint - View topic - Base coat to ...

9/07/2007  How long should you wait after your base coat to apply your clear coat, and is it recommended or okay to wet sand base coat to rid ... The second and third coat

How Long Do You Let Polyurethane Cure Before Wet Sanding ...

Wipe the surface with a tack cloth after the final sanding to remove ... Apply the second coat using a ... "How Long Do You Let Polyurethane Cure Before Wet Sanding?"

How to Sand and Buff Clear Coat YourMechanic Advice

How to Sand and Buff Clear Coat by Mark ... Begin to wet-sand the clear coat. ... on one area for more than a couple seconds or you risk damaging the base coat.

Why You Shouldn't Sand Between Coats on Touch Up

Why You Shouldn't Sand Between Coats on Touch Up Paint Projects. ... We usually recommend not sanding between touch up base ... Wet sanding and polishing the ...

How to Apply a Clear Base Coat to a Car

How to Apply a Clear Base Coat to ... a light wet sand before applying the base coat). ... you did the base coat. Step 7: Buff your vehicle. After the clear ...

How to Sand a Clear Coat Without Sanding the Paint

Scratches that don't extend through to the base coat can usually be removed by sanding, ... a sanding block. Wet the ... Sand a Clear Coat Without Sanding the Paint ...

Dry time for coats of spray paint - Google Groups

Dry time for coats of spray paint ... If wet sanding, allow at least an hour or two before sanding - then coat immediately after the item is FULLY dried from the sanding

Buffing clear coat after new painting - Paint Correction ...

3/08/2013  I just had my 65 convertible mustang painted base coat,then clear coat. ... Buffing clear coat after new painting ... Also should I wet sand

Metallic colour coats and wet sanding? Telecaster

7/03/2014  Metallic colour coats and wet sanding ... I would sand the surface after filler. Apply primer/base. Sand again. Apply metallic. Apply clear coats. Sand. Clear coat ...

House Of Kolor - FAQ Page

When I applied the second, third, etc. coat of ... wet-sand with 600 or P800 ... You can apply Kameleon over any of the House of Kolor Shimrin base coat colors to get ...

Wet-Sanding - WOOD Magazine

Wet-sand with a simple solution of liquid detergent and water, ... Apply a second coat of filler, ... Wet-sanding lubricates the surface being abraded, ...

Hobby Auto Restoration: Primer and Sanding -

2/03/2010  Hobby Auto Restoration: Primer and Sanding. ... or spray a layer of the base coat paint and wet sand once more. ... Any special kind of drying after sanding??

Spray Paint Directions AutomotiveTouchup

Directions for using an aerosol spray paint can at ... Use 600 wet sandpaper to sand the area you ... Allow 30 minutes after base coat color has been ...

Did I screw up my wet-sanding? : AutoDetailing - reddit

Did I screw up my wet-sanding? ... Here are some pics of the spot after applying some Klasse. First pic. Second pic. ... and a base coat.

Wetsand then Clear coat? [Archive] - LS1GTO Forums

19/08/2011  wet sand the roughness out of the base coat ... Thats exactly what I use to do after ... if you are spraying a metallic or pearl color DO NOT SAND THE BASE COAT ...

House Of Kolor - FAQ Page

When I applied the second, third, etc. coat of ... wet-sand with 600 or P800 ... You can apply Kameleon over any of the House of Kolor Shimrin base coat colors to get ...

Wet-Sanding Prior to or after applying clear enamel? - reddit

Wet-Sanding Prior to or after applying clear enamel? ... Wet-sand the primer ... do not sand it too fine between base coat and clear coat. 800 wet before clear coat ...

Sanding after Base Coat? - Bike Forums

3/08/2008  Classic Vintage - Sanding after Base Coat? - Hi, I am using Rust-Oleum paints (including primer, base color, and clear coat). For the base coat

Metallic colour coats and wet sanding? Telecaster

7/03/2014  Metallic colour coats and wet sanding ... I would sand the surface after filler. Apply primer/base. Sand again. Apply metallic. Apply clear coats. Sand. Clear coat ...

Polishing basecoat...waste of time? - Car Forums and ...

28/10/2009  If the base coat has ... Wet sanding non-metallic ... meaning is it ok to polish up the clear coat layer too? After you are done with all painting that is when ...

Please help with Duplicolor and Clear Coat advice ...

3/08/2011  Please help with Duplicolor and Clear Coat advice ... the color after the next color coat attempt, can I sand it smooth ... of the wet sanding and ...

Gyprock Base Coat 45 - Gyprock

Gyprock Base Coat 45 ... Gyprock Base Coat 45 is a specially formulated base compound used for the first and second coat in a ... then sand to a smooth ...

Glossy Car, Wet Sanding, Paint Polishing, color sanding ...

Click on photos below to see examples of amazing shine after wet sanding! ... Some cars we will not wet sand if the clear coat is too thin or the paint is too hard ...

should i sand touchup paint before clear coat? Yahoo Answers

23/02/2008  i have just had a go at painting the roof of my car with 3-4 cans of touch up paint after sanding all over. i am ready to clear coat, but the red coat ...

Status: Resolved